ArchitectureAutomobile

Did the key stick in Ignition? Here’s What You Need to Do

If you’re having trouble removing your key from the ignition, don’t worry – you’re not alone. A Key stuck in the ignition is a common problem that many drivers face. The key can sometimes become stuck due to corrosion or other factors. If this happens, it’s vital to take action right away. Otherwise, you may end up stranded on the side of the road. 

Here’s what you need to do if your key gets stuck in the ignition:

Don’t force it

The first thing to remember is not to force the key out of the ignition. Doing so can damage expensive parts, resulting in costly repairs. In addition, forcing the key out may cause the car to start, suddenly putting you and others in danger.

Turn on your steering wheel

The wheel lock is another security device that might stop your key from slipping out of the ignition. Wheel lock typically engages when you apply force to the steering while turning the power off. Fortunately, the wheel clamp is simple to fix and prevents movement when no key is present. Use light pressure to turn the key and the wheel simultaneously. Try moving in the reverse, and if you don’t hear, a click. Be careful to turn the key slowly lest you risk breaking it.

Replace your battery

The ignition system requires power to run, and if your battery is dead or low, the key may remain stuck in the ignition. To ascertain your battery is low, turn on the key. If you hear a repeated clicking sound, Try replacing your car battery to see if that fixes the key stuck in the ignition problem.

Replace your ignition cylinder

If none of the steps above have worked, you may need to replace your ignition cylinder. An ignition cylinder replacement is a task that an experienced car locksmith should do. They can remove the old cylinder and install a new one that fits correctly in your vehicle. In addition, they will ensure all other components are working correctly, so you don’t experience any further issues with your key getting stuck in the ignition.

Ensure the gear shift is in line

When the gear shift is in a park, and the key does not come out, you must check if it is properly aligned. If it isn’t, you can get it back in line by pressing the brake pedal and shifting it into drive once or twice. After that, turn off the car and try to remove your key again.

Spray Lubricant Into the Ignition Lock

If your key is still stuck, you may need to lubricate the lock. Spray a lubricant such as WD-40 into the ignition and try turning it back and forth. The lubricant should help loosen up any debris or grime inside the lock. Once you’ve done this, try to remove your key once again.

Try wiggling the key.

Sometimes, a key may become stuck due to an improper fit. If this is the case, you can gently wiggle the key back and forth to loosen it up. Wiggling should help you get your key out without any further issues.

Call a locksmith

If you try all the above methods and the key won’t come out of the ignition, it’s time to call a car locksmith. They will be able to help you with the key stuck in the ignition and diagnose any other potential problems that may be causing it to get stuck. With their help, you can get back on the road quickly and safely.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button